Performance advantages of High-Temperature High-Strength Nano Lightweight Aggregate. Semi-lightweight high-strength castables refractory can be produced while taking into account the ultra-high strength of dense refractory castables and the low thermal conductivity of lightweight castables refractory. It can be applied in ladle permanent lining, ladle cover, tundish permanent lining, tundish cover, rolling heating furnace working refractory lining, etc.
High-Temperature High-Strength Nano Lightweight Aggregate
The emergence of High-Temperature High-Strength Nano Lightweight Aggregate will become a new choice for the working layer of many furnace types. At the same time, this raw material can also be used as a bulk density regulator for refractory precast shapes parts, and refractory castables.
Refractory Products with excellent performance can be produced by using this High-Temperature High-Strength Nano Lightweight Aggregate raw material, and are widely used in the insulation layer of high-temperature industrial kilns. Effectively reduce the outer wall temperature of high-temperature industrial furnaces and save production costs.
This High-Temperature High-Strength Nano Lightweight Aggregate can be used to make the following products with excellent performance:
| Item | Type A | Type B | |
| BD, g/cm³ | ≤1.7 | ≤1.7 | |
| CCS, MPa | ≥50 | ≥50 | |
| TC, W/( m.K) | Hot Side 800℃ | 0.400 | 0.650 |
| Working Temperature, ℃ | ≥1450 | ≥1350 | |
RS Alumina Refractory Manufacturer
In the design and construction of insulation layer refractory materials for industrial kilns, good design, and construction can not only save the number of refractory products used but also reduce the outer wall temperature of the kiln refractory lining materials. This can not only save production energy but also better ensure production safety. High-Temperature High-Strength Nano Lightweight Aggregate in Rongsheng Refractory Factory has been committed to the safe and efficient production of high-temperature industrial kilns.
- If you are also looking for a suitable solution for refractory materials for the insulation layer of high-temperature industrial kilns, there is still no answer.
- Or, you are trying some refractory design schemes to reduce the temperature of the outer wall of the high-temperature industrial furnace, but the effect is not satisfactory.
- Or, you are going to build a new high-temperature industrial furnace and want to save money on refractory materials.
RS Alumina Refractory Manufacturer can provide suggestions for reliable refractory lining materials. We can also discuss with you the design and configuration of better insulation layer refractories according to the production conditions of high-temperature industrial furnaces. High-Temperature High-Strength Nano Lightweight Aggregate can be used as Semi-Lightweight Refractories, Making up for the application defects of lightweight refractory materials and dense refractory materials. Rongsheng Refractory Group aims to provide better insulation materials to serve high-temperature industrial kilns. Contact us for more information for free.
