Heating Furnace Refractory

Heating Furnace Refractory Description

Heating furnace is thermal equipment used for heating steel billets or small steel ingots during steel rolling or steel forging. Heating furnace’s working temperature is usually below 1400℃. For continuous or circular heating furnaces, there are three temperature zones: low temperature zone, middle temperature zone and high temperature zone, i.e., preheating zone, heating zone and soaking zone, the temperature is 800~900℃, 1150~1200℃, 1200~1300℃, respectively.

The main damage reason of furnace lining is temperature fluctuation caused by discontinuous operation or alternative stop and open of furnace. Furnace bottom and furnace wall base part are mainly damaged by chemical reaction of molten iron oxide and firebricks. So different refractory materials should be chosen for different parts. If the working condition of heating furnace is good, the service life will be longer than 2 years.

Heating Furnace Refractory Classification

Alumina silica refractories are usually used in heating furnaces. Working lining of heating furnace is built by alumina silica firebricks, while outer lining is built by lightweight clay bricks, insulating boards and so on. For example, the roof of soaking zone and heating zone can adopt high alumina hoisting bricks. From inner layer to outer layer, furnace wall is built by high alumina bricks, clay bricks, lightweight clay bricks and insulating boards. Heating zone furnace bottom should resist iron oxide slag corrosion, so magnesia chrome bricks or magnesia bricks can be used here. At preheating zone, working layer can choose clay bricks.

With the development of castable, the ratio of casting refractory used in heating furnaces is increasing gradually. It brings great convenience for mechanization and automation. Meanwhile, the service life, heat preservation efficient and integration ratio are increased.